TM 5-2410-241-23-2
0127
LOOSE TRACK ADJUSTMENT CONTINUED
2. Remove four bolts (Figure 14, Item 2), washers (Figure 14, Item 3), cap (Figure 14, Item 1), and O-ring
(Figure 14, Item 4) from adjuster (Figure 14, Item 5). Discard O-ring.
Figure 14. Adjuster Cap.
0127
WARN I N G
Loosen relief valve one turn only. Grease inside adjuster is under high pressure. Failure to
follow this warning may cause injury to personnel.
3. Loosen relief valve (Figure 15, Item 1) one turn (360 degrees) from adjuster (Figure 15, Item 2). Allow grease
to escape.
4. Tighten relief valve (Figure 15, Item 1) on adjuster (Figure 15, Item 2).
Figure 15. Adjuster Release.
0127