• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Figure 6. Track Connection.
Figure 9. Track Adjustment.

Field Maintenance Manual D7R Dozer Type I With Winch and Type II With Ripper
Page Navigation
  605    606    607    608    609  610  611    612    613    614    615  
img
.
TM 5-2410-241-23-2
0127
INSTALLATION CONTINUED
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure
to follow this warning may cause injury or death to personnel.
N OT E
Track shoe weighs approximately 85 lb (40 kg).
8. With assistance, install track shoe (Figure 7, Item 1) and four bolts (Figure 7, Item 6) on master link (Figure 7,
Item 2). Tighten bolts to 250 lb-ft (340 Nm). Then tighten bolts 180 degrees.
9. Remove blocking (Figure 7, Item 5) from lower track (Figure 7, Item 4) and rear idler (Figure 7, Item 3).
Figure 7. Track Blocking.
0127
0127-7


Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved.