TM 5-2410-241-23-2
0156
REMOVAL CONTINUED
N OT E
Steps 24 and 25 remove the information plates for replacement of battery box panels. Do
not remove information plates if panels are not being replaced.
24. Remove four rivets (Figure 9, Item 3) and information plates (Figure 9, Item 2) from side battery box panel
(Figure 9, Item 1). Discard rivets.
25. Remove four rivets (Figure 9, Item 5) and information plates (Figure 9, Item 6) from front battery box panel
(Figure 9, Item 4). Discard rivets.
Figure 9. Information Plates.
0156
END OF TASK
CLEANING AND INSPECTION
000156
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0295).
END OF TASK
INSTALLATION
000156
N OT E
Steps 1 and 2 install the information plates for replacement of battery box panels.
Information plates should not be removed if battery box panels are re-used.
1. Install information plate (Figure 9, Item 6) and four new rivets (Figure 9, Item 5) on front battery box panel
(Figure 9, Item 4).
2. Install information plate (Figure 9, Item 2) and four new rivets (Figure 9, Item 3) on side battery box panel
(Figure 9, Item 1).
