TM 5-2410-241-23-2
0188
REMOVAL CONTINUED
10. Remove four nuts (Figure 3, Item 5), bolts (Figure 3, Item 7), eight washers (Figure 3, Item 6), and number
plate (Figure 3, Item 8) from hydraulic tank enclosure (Figure 3, Item 1).
11. Remove six rivets (Figure 3, Item 3) and lube order information plate (Figure 3, Item 4) from door (Figure 3,
Item 2). Discard rivets.
Figure 3. Information Plates.
0188
END OF TASK
CLEANING AND INSPECTION
000188
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0295).
END OF TASK
INSTALLATION
000188
1. Install lube order information plate (Figure 3, Item 4) and six new rivets (Figure 3, Item 3) on door (Figure 3,
Item 2).
2. Install number plate (Figure 3, Item 8), eight washers (Figure 3, Item 6), four bolts (Figure 3, Item 7), and nuts
(Figure 3, Item 5) on hydraulic tank enclosure (Figure 3, Item 1).