TM 5-2410-241-23-3
0205
INSTALLATION CONTINUED
N OT E
Install shims as noted in removal.
33. Install shims (Figure 21, Item 4), cap (Figure 21, Item 5), four bolts (Figure 21, Item 2), and nuts (Figure 21,
Item 3) and on cylinder (Figure 21, Item 1).
34. Repeat steps 27- 32 for other cylinder.
Figure 21. Cylinder Caps.
0205
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure
to follow these warnings may cause injury or death to personnel.
N OT E
Door weighs approximately 120 lb (54 kg).
