TM 5-2410-241-23-3
0207
REMOVAL CONTINUED
4. Remove two bolts (Figure 3, Item 3), washers (Figure 3, Item 4), and cover plate (Figure 3, Item 5) from upper
left panel (Figure 3, Item 6).
5. Remove four bolts (Figure 3, Item 1) and washers (Figure 3, Item 2) from upper left panel (Figure 3, Item 6).
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure
to follow this warning may cause injury or death to personnel.
6. Remove four bolts (Figure 3, Item 9), washers (Figure 3, Item 8), and upper left panel (Figure 3, Item 6) from
console (Figure 3, Item 10).
7. If damaged, remove foam (Figure 3, Item 7) from upper left panel (Figure 3, Item 6).
Figure 3. Upper Left Panel.
0207
END OF TASK
CLEANING AND INSPECTION
000207
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0295).
END OF TASK