TM 5-2410-241-23-3
0269
REMOVAL CONTINUED
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure
to follow this warning may cause injury or death to personnel.
N OT E
Corner blade cutting edges weigh 70 lb (32 kg) each.
3. With assistance, remove seven nuts (Figure 2, Item 3), washers (Figure 2, Item 4), bolts (Figure 2, Item 1), and
right corner blade cutting edge (Figure 2, Item 9) from blade assembly (Figure 2, Item 2).
4. With assistance, remove seven nuts (Figure 2, Item 3), washers (Figure 2, Item 4), bolts (Figure 2, Item 1), and
left corner blade cutting edge (Figure 2, Item 5) from blade assembly (Figure 2, Item 2).
N OT E
Center blade cutting edges weigh 90 lb (41 kg) each.
5. With assistance, remove six nuts (Figure 2, Item 3), washers (Figure 2, Item 4), bolts (Figure 2, Item 1), and
center blade cutting edge (Figure 2, Item 7) from blade assembly (Figure 2, Item 2).
6. With assistance, remove six nuts (Figure 2, Item 3), washers (Figure 2, Item 4), bolts (Figure 2, Item 1), and
left center blade cutting edge (Figure 2, Item 6) from blade assembly (Figure 2, Item 2).
7. With assistance, remove six nuts (Figure 2, Item 3), washers (Figure 2, Item 4), bolts (Figure 2, Item 1), and
right center blade cutting edge (Figure 2, Item 8) from blade assembly (Figure 2, Item 2).
Figure 2. Blade Cutting Edges.
0269
END OF TASK