TM 5-2410-240-23-1
0019
Table 2. Engine Troubleshooting with Codes - Continued.
0019
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
0168-02 Electrical System Voltage
2. Turn ignition and battery dis-
Erratic, Intermittent, or Incorrect
connect switch to OFF posi-
Continued
tion (TM 5-2410-240-10).
3. Disconnect engine ECM har-
ness connector EN-C13
(WP 0018, Figure 130) from
the engine ECM J2.
4. Turn battery disconnect switch
to ON position (TM 5-2410-
240-10).
5. Using digital multimeter
One or More Test Points Less
(WP 0283), measure battery
than 18 Volts DC - Proceed to
voltage supply circuits for 18-
Test Step 3.
24 Volts DC between engine
Voltage within 18 - 24 Volts DC
ECM harness connector EN-
Range - Proceed to Test Step 2.
C13 (WP 0018, Figure 130)
and ground:
a. Engine ECM harness
connector EN-C13
(WP 0018, Figure 130)
terminal 7 and ground.
b. Engine ECM harness con-
nector EN-C13
(WP 0018, Figure 130)
terminal 8 and ground.
c. Engine ECM harness con-
nector EN-C13 (WP 0018,
Figure 130) terminal 15
and ground.
d. Engine ECM harness con-
nector EN-C13 (WP 0018,
Figure 130) terminal 16
and ground.
0019-73