TM 5-2410-240-23-1
0020
Table 2. Powertrain and Chassis Troubleshooting with Codes - Continued.
CID FMI CODE
Test or Inspection
Corrective Action
0168-02 Electrical System
2. Turn ignition switch and battery
Voltage Data Erratic, Inter-
disconnect switch to OFF position
mittent, or Incorrect - Con-
(TM 5-2410-240-10).
tinued
3. Inspect fuse number 30 (TM 5-
Fuse Loose - Replace fuse and verify
2410-240-10) for loose connec-
proper operation of machine (TM 5-
tions.
2410-240-10).
Fuse OK - Proceed to step 4.
4. Disconnect platform harness to
fuse panel harness connector PL-
fuse panel harness to platform
harness connector FP-C3 (WP
Continuity - Proceed to step 6.
0283), test for continuity between
pin 7 on fuse panel harness to
harness (WP 0201). Ensure all har-
platform harness connector FP-
ness connectors are reconnected.
Verify proper operation of machine
fuse number 30 (TM 5-2410-240-
(TM 5-2410-240-10).
10).
Continuity - Proceed to step 7.
0283), test for continuity between
pin 8 on fuse panel harness to
harness (WP 0201). Ensure all har-
platform harness connector FP-
ness connectors are reconnected.
Verify proper operation of machine
fuse number 30 (TM 5-2410-240-
(TM 5-2410-240-10).
10).
7. Disconnect platform harness
ECM J1 connector PL-C4 (WP
0018, Figure 217) from machine
ECM (WP 0147, WP 0149).
Continuity - Proceed to step 9.
0283), test for continuity between
No Continuity - Replace platform wir-
pin 31 on platform harness ECM
ing harness (WP 0150, WP 0155).
Ensure all harness connectors are
Figure 217) and pins 7 on plat-
reconnected. Verify proper operation
form harness to fuse panel har-
of machine (TM 5-2410-240-10).
Figure 216).
0020-31