TM 5-2410-240-23-1
0020
Table 2. Powertrain and Chassis Troubleshooting with Codes - Continued.
CID FMI CODE
Test or Inspection
Corrective Action
0168-02 Electrical System
9. Using digital multimeter (WP
Continuity - Proceed to step 10.
Voltage Data Erratic, Inter-
0283), test for continuity between
No Continuity - Replace platform wir-
mittent, or Incorrect - Con-
pin 31 on platform harness ECM
ing harness (WP 0150, WP 0155).
tinued
J1 connector PL-C4 (WP 0018,
Ensure all harness connectors are
Figure 217) and pin 8 on platform
reconnected. Verify proper operation
harness to fuse panel harness
of machine (TM 5-2410-240-10).
connector PL-C3 (WP 0018, Fig-
ure 216).
10. Using digital multimeter (WP
Continuity - Proceed to step 11.
0283), test for continuity between
No Continuity - Replace platform wir-
pin 38 on platform harness ECM
ing harness (WP 0150, WP 0155).
J1 connector PL-C4 (WP 0018,
Ensure all harness connectors are
Figure 217) and pin 7 on platform
reconnected. Verify proper operation
harness to fuse panel harness
of machine (TM 5-2410-240-10).
connector PL-C3 (WP 0018, Fig-
ure 216).
11. Using digital multimeter (WP
Continuity - Proceed to step 12.
0283), test for continuity between
No Continuity - Replace platform wir-
pin 38 on platform harness ECM
ing harness (WP 0150, WP 0155).
J1 connector PL-C4 (WP 0018,
Ensure all harness connectors are
Figure 217) and pin 8 on platform
reconnected. Verify proper operation
harness to fuse panel harness
of machine (TM 5-2410-240-10).
connector PL-C3 (WP 0018, Fig-
ure 216).
12. Using digital multimeter (WP
Continuity - Proceed to step 13.
0283), test for continuity between
No Continuity - Replace platform wir-
pin 39 on platform harness ECM
ing harness (WP 0150, WP 0155).
J1 connector PL-C4 (WP 0018,
Ensure all harness connectors are
Figure 217) and pin 7 on platform
reconnected. Verify proper operation
harness to fuse panel harness
of machine (TM 5-2410-240-10).
connector PL-C3 (WP 0018, Fig-
ure 216).
13. Using digital multimeter (WP
Continuity - Proceed to step 14.
0283), test for continuity between
No Continuity - Replace platform wir-
pin 39 on platform harness ECM
ing harness (WP 0150, WP 0155).
J1 connector PL-C4 (WP 0018,
Ensure all harness connectors are
Figure 217) and pin 8 on platform
reconnected. Verify proper operation
harness to fuse panel harness
of machine (TM 5-2410-240-10).
connector PL-C3 (WP 0018, Fig-
ure 216).
14. Using digital multimeter (WP
Continuity - Proceed to step 15.
0283), test for continuity between
No Continuity - Replace platform wir-
pin 47 on platform harness ECM
ing harness (WP 0150, WP 0155).
J1 connector PL-C4 (WP 0018,
Ensure all harness connectors are
Figure 217) and pin 7 on platform
reconnected. Verify proper operation
harness to fuse panel harness
of machine (TM 5-2410-240-10).
connector PL-C3 (WP 0018, Fig-
ure 216).
0020-32