TM 5-2410-240-23-1
0021
Table 2. Cab Troubleshooting With Codes. - Continued.
0021
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2305-04 Brake/Decelerator Pedal
15. Using digital multimeter, test
No Continuity - Replace lower
Position Sensor Voltage Below Nor-
for continuity (WP 0283)
cab harness (WP 0228). Ensure all
mal - Continued
between harness connector
harness connectors are recon-
C-C38 (WP 0018, Figure 29)
nected. Verify proper operation of
terminal 10 and harness con-
machine (TM 5-2410-240-10).
nector C-C40 (WP 0018, Fig-
Continuity - Proceed to step 16.
ure 30) terminal 19.
16. Using digital multimeter, test
No Continuity - Replace lower
for continuity (WP 0283)
cab harness (WP 0228). Ensure all
between harness connector
harness connectors are recon-
C-C38 (WP 0018, Figure 29)
nected. Verify proper operation of
terminal 9 and harness con-
machine (TM 5-2410-240-10).
nector C-C40 (WP 0018, Fig-
Continuity - Proceed to step 17.
ure 30) terminal 31.
17. Using digital multimeter, test
No Continuity - Proceed to
for continuity (WP 0283)
step 18.
between harness connector
Continuity - Replace lower cab
C-C12 (WP 0018, Figure 22)
harness (WP 0228). Ensure all
terminal 35 and all other termi-
harness connectors are recon-
nals in harness connector C-
nected. Verify proper operation of
C12 (WP 0018, Figure 22).
machine (TM 5-2410-240-10).
18. Disconnect harness connec-
tor PL-C3 (WP 0018, Figure
216) from FP-C3 (WP 0018,
Figure 168).
19. Using digital multimeter, test
No Continuity - Replace lower
for continuity (WP 0283)
cab harness (WP 0228). Ensure all
between harness connector
harness connectors are recon-
FP-C3 (WP 0018, Figure 168)
nected. Verify proper operation of
terminal 3 and harness con-
machine (TM 5-2410-240-10).
nector FP-C5 (WP 0018, Fig-
Continuity - Proceed to step 20.
ure 170) terminal 19.
20. Using digital multimeter, test
No Continuity - Replace lower
for continuity (WP 0283)
cab harness (WP 0228). Ensure all
between harness connector
harness connectors are recon-
FP-C3 (WP 0018, Figure 168)
nected. Verify proper operation of
terminal 11 and harness con-
machine (TM 5-2410-240-10).
nector FP-C5 (WP 0018, Fig-
Continuity - Proceed to step 21.
ure 170) terminal 31.
21. Disconnect harness connec-
tor PL-C4 (WP 0018, Figure
217) from equipment ECM J1.
22. Disconnect harness connec-
tor PL-C5 (WP 0018, Figure
218) from equipment ECM J2.
0021-251
