TM 5-2410-240-23-1
0021
Table 2. Cab Troubleshooting With Codes. - Continued.
0021
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2305-08 Brake/Decelerator Pedal
10. Using digital multimeter, test
No Continuity - Replace lower
Position Sensor Abnormal Fre-
for continuity (WP 0283)
cab harness (WP 0228). Ensure all
quency, Pulse Width Or Period -
between harness connector P-
harness connectors are recon-
Continued
C1 (WP 0018, Figure 197) ter-
nected. Verify proper operation of
minal 3 and harness connec-
machine (TM 5-2410-240-10).
tor PC-8 (WP 0018, Figure
Continuity - Proceed to step 11.
202) terminal C.
11. Using digital multimeter, test
No Continuity - Proceed to
for continuity (WP 0283)
step 12.
between harness connector P-
Continuity - Replace lower cab
C1 (WP 0018, Figure 197) ter-
harness (WP 0228). Ensure all
minal 3 and all other terminals
harness connectors are recon-
in harness connector P-C1
nected. Verify proper operation of
(WP 0018, Figure 197).
machine (TM 5-2410-240-10).
12. Disconnect harness connec-
tor C-C12 (WP 0018, Figure
22) from PL-C1 (WP 0018,
Figure 214).
13. Disconnect harness connec-
tor C-C40 (WP 0018, Figure
30) from FP-C5 (WP 0018,
Figure 170).
14. Using digital multimeter, test
No Continuity - Replace lower
for continuity (WP 0283)
cab harness (WP 0228). Ensure all
between harness connector
harness connectors are recon-
C-C12 (WP 0018, Figure 22)
nected. Verify proper operation of
terminal 35 and harness con-
machine (TM 5-2410-240-10).
nector C-C38 (WP 0018, Fig-
Continuity - Proceed to step 15.
ure 29) terminal 11.
15. Using digital multimeter, test
No Continuity - Replace lower
for continuity (WP 0283)
cab harness (WP 0228). Ensure all
between harness connector
harness connectors are recon-
C-C38 (WP 0018, Figure 29)
nected. Verify proper operation of
terminal 10 and harness con-
machine (TM 5-2410-240-10).
nector C-C40 (WP 0018, Fig-
Continuity - Proceed to step 16.
ure 30) terminal 19.
16. Using digital multimeter, test
No Continuity - Replace lower
for continuity (WP 0283)
cab harness (WP 0228). Ensure all
between harness connector
harness connectors are recon-
C-C38 (WP 0018, Figure 29)
nected. Verify proper operation of
terminal 9 and harness con-
machine (TM 5-2410-240-10).
nector C-C40 (WP 0018, Fig-
Continuity - Proceed to step 17.
ure 30) terminal 31.
0021-254