TM 5-2410-240-23-1
0021
Table 2. Cab Troubleshooting With Codes. - Continued.
0021
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2438-04 Winch Free Spool Switch
9. Using digital multimeter, test
No Continuity - Proceed to
Voltage Below Normal - Continued
for continuity (WP 0283)
step 10.
between harness connector
Continuity - Replace lower cab
C-C12 (WP 0018, Figure 22)
harness (WP 0228). Ensure all
terminal 8 and all other termi-
harness connectors are recon-
nals in C-C12 (WP 0018, Fig-
nected. Verify proper operation of
ure 22).
machine (TM 5-2410-240-10).
10. Disconnect harness connec-
tor PL-C5 (WP 0018, Figure
218) from equipment ECM J2.
11. Using digital multimeter, test
No Continuity - Replace platform
for continuity (WP 0283)
harness (WP 0150, WP 0155).
between PL-C1 (WP 0018,
Ensure all harness connectors are
Figure 214) harness connec-
reconnected. Verify proper opera-
tor terminal 8 and PL-C5 (WP
tion of machine (TM 5-2410-240-
0018, Figure 218) equipment
10).
ECM J2 terminal 37.
Continuity - Proceed to step 12.
12. Using digital multimeter, test
No Continuity - Replace platform
for continuity (WP 0283)
harness (WP 0150, WP 0155).
between PL-C1 (WP 0018,
Ensure all harness connectors are
Figure 214) harness connec-
reconnected. Verify proper opera-
tor terminal 9 and PL-C5 (WP
tion of machine (TM 5-2410-240-
0018, Figure 218) equipment
10).
ECM J2 terminal 36.
Continuity - Proceed to step 13.
13. Using digital multimeter, test
No Continuity - Proceed to
for continuity (WP 0283)
step 14.
between PL-C5 (WP 0018,
Continuity - Replace harness
Figure 218) equipment ECM
(WP 0150, WP 0155). Ensure all
J2 terminal 36 and all other
harness connectors are recon-
terminals in harness connec-
nected. Verify proper operation of
tor PL-C5 (WP 0018, Figure
machine (TM 5-2410-240-10).
218).
0021-260
