TM 5-2410-240-23-1
0021
Table 2. Cab Troubleshooting With Codes. - Continued.
0021
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2481-04 Winch Drive Away Switch
4. Using digital multimeter, test
No Continuity - Replace lower
Voltage Below Normal - Continued
for continuity (WP 0283)
cab harness (WP 0228). Ensure all
between harness connector
harness connectors are recon-
C-C52 (WP 0018, Figure 39)
nected. Verify proper operation of
terminal 2 and machine
machine (TM 5-2410-240-10).
ground.
Continuity - Proceed to step 5.
5. Disconnect harness connec-
tor C-C12 (WP 0018, Figure
22) from PL-C1 (WP 0018,
Figure 214).
6. Using digital multimeter, test
No Continuity - Replace lower
for continuity (WP 0283)
cab harness (WP 0228). Ensure all
between harness connector
harness connectors are recon-
C-C52 (WP 0018, Figure 39)
nected. Verify proper operation of
terminal 1 and harness con-
machine (TM 5-2410-240-10).
nector C-C12 (WP 0018, Fig-
Continuity - Proceed to step 7.
ure 22) terminal 6.
7. Using digital multimeter, test
No Continuity - Replace lower
for continuity (WP 0283)
cab harness (WP 0228). Ensure all
between harness connector
harness connectors are recon-
C-C52 (WP 0018, Figure 39)
nected. Verify proper operation of
terminal 3 and harness con-
machine (TM 5-2410-240-10).
nector C-C12 (WP 0018, Fig-
Continuity - Proceed to step 8.
ure 22) terminal 5.
8. Using digital multimeter, test
No Continuity - Proceed to
for continuity (WP 0283)
step 9.
between harness connector
Continuity - Replace lower cab
C-C12 (WP 0018, Figure 22)
harness (WP 0228). Ensure all
terminal 5 and all other termi-
harness connectors are recon-
nals in C-C12 (WP 0018, Fig-
nected. Verify proper operation of
ure 22).
machine (TM 5-2410-240-10).
9. Using digital multimeter, test
No Continuity - Proceed to
for continuity (WP 0283)
step 10.
between harness connector
Continuity - Replace lower cab
C-C12 (WP 0018, Figure 22)
harness (WP 0228). Ensure all
terminal 6 and all other termi-
harness connectors are recon-
nals in C-C12 (WP 0018, Fig-
nected. Verify proper operation of
ure 22).
machine (TM 5-2410-240-10).
10. Disconnect harness connec-
tor PL-C4 (WP 0018, Figure
217) from equipment ECM J1.
0021-264