TM 5-2410-240-23-1
0023
Table 2. Blade, Winch, and Ripper Troubleshooting With Codes - Continued.
0023
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
3. Remove right side debris guards
1884-03 Winch Spool In
from machine (WP 0187).
Solenoid Voltage Above Nor-
4. Disconnect pump wiring harness
mal - Continued
connector PH-C1 (WP 0018, Fig-
ure 205) from engine wiring har-
ness connector EN-C21 (WP
0018, Figure 137) (WP 0046).
5. Turn battery disconnect switch
and ignition switch to ON position
(TM 5-2410-240-10).
6. Check for active code 1884-03 in
Code 1884-03 Remains Active - Pro-
machine control D6K ECM (WP
ceed to Test Step 2.
Code 1884-03 Becomes Inactive -
Replace pump wiring harness (WP
0046).
Proceed to step 7.
7. Using MSD (WP 0016), select
Code 1884-03 Active - Repeat trou-
machine control D6K ECM and
bleshooting code from the beginning.
verify 1884-03 is not active.
Code 1884-03 Not Active - Trouble-
shooting complete.
Test Step 2. Test for Shorted
Engine Wiring Harness.
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-2410-240-10).
2. Remove front floor plate from
machine (WP 0205).
3. Disconnect engine wiring har-
ness connector EN-C50 (WP
0018, Figure 140) from platform
wiring harness connector PL-C32
(WP 0018, Figure 232) (WP
0046).
4. Turn battery disconnect switch
and ignition switch to ON position
(TM 5-2410-240-10).
5. Check for active code 1884-03 in
Code 1884-03 Remains Active - Pro-
machine control D6K ECM (WP
ceed to Test Step 3.
Code 1884-03 Becomes Inactive -
Replace engine wiring harness (WP
0046).
Proceed to step 6.
0023-81