TM 5-2410-240-23-1
0023
Table 2. Blade, Winch, and Ripper Troubleshooting With Codes - Continued.
0023
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2268-03 Winch Free Spool
Test Step 1. Test for Shorted Winch
Solenoid Voltage Above Nor- Wiring Harness.
mal - Continued
1. Connect MSD (WP 0016). Select
machine control D6K ECM and
verify 2268-03 is active.
2. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-2410-240-10).
3. Remove rear bottom guards from
machine (WP 0156).
4. Disconnect winch wiring harness
connector WF-C1 (WP 0018, Fig-
ure 253) from winch solenoid wir-
ing harness connector WC-C3
(WP 0018, Figure 250) (WP
0137).
5. Turn battery disconnect switch
and ignition switch to the ON posi-
tion (TM 5-2410-240-10).
Code 2268-03 Remains Active - Pro-
6. Check for active code 2268-03 in
ceed to Test Step 2.
machine control D6K ECM (WP
Code 2268-03 Becomes Inactive -
Replace winch wiring harness (WP
0265).
Proceed to step 7.
7. Using MSD (WP 0016), select
Code 2268-03 Active - Repeat trou-
machine control D6K ECM and
bleshooting code from the beginning.
verify 2268-03 is not active.
Code 2268-03 Not Active - Trouble-
shooting complete.
Test Step 2. Test for Shorted Winch
Solenoid Wiring Harness.
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-2410-240-10).
2. Remove right rear access cover
from machine (WP 0191).
3. Disconnect winch solenoid wiring
harness connector WC-C2 (WP
0018, Figure 249) from platform
wiring harness connector PL-C33
(WP 0018, Figure 233) (WP
0137).
0023-206
