TM 5-2410-240-23-1
0031
TRANSMISSION STALL TEST CONTINUED
7. Relieve hydraulic system pressure (WP 0147) and install pressure gauge at left side hydrostatic pump
pressure tap (Figure 1, Item 2) and right side hydrostatic pump pressure tap (Figure 1, Item 3) on test panel
(Figure 1, Item 1). Refer to WP 0291 for pressure gauge and hose setup.
Figure 1. Test Panel.
0031
8. Remove cab floor plate (WP 0205), and install pressure gauge at left side hydrostatic pump pressure tap (Fig-
ure 2, Item 2) and right side hydrostatic pump pressure tap (Figure 2, Item 1). Refer to WP 0291 for pressure
gauge and hose setup.
Figure 2. Hydrostatic Pump Pressure Test Port.
0031
