TM 5-2410-240-23-2
0045
REMOVAL CONTINUED
2. Loosen two clamps (Figure 2, Item 5).
3. Remove hose (Figure 2, Item 4) and two clamps (Figure 2, Item 5) from muffler (Figure 2, Item 1) and position
aside.
4. Loosen clamp (Figure 2, Item 7).
5. Remove three bolts (Figure 2, Item 3) and spacers (Figure 2, Item 2) from muffler (Figure 2, Item 1).
6. Push muffler (Figure 2, Item 1) up off pipe (Figure 2, Item 6).
7. With assistance, remove muffler (Figure 2, Item 1) and clamp (Figure 2, Item 4) from machine.
8. Remove clamp (Figure 2, Item 4) from muffler (Figure 2, Item 1).
Figure 2. Muffler Removal.
0045
END OF TASK
CLEANING AND INSPECTION
00045
Clean and inspect all mechanical parts IAW Mechanical General Maintenance Instructions (WP 0282).
END OF TASK
INSTALLATION
00045
1. Install clamp (Figure 2, Item 4) on muffler (Figure 2, Item 1).
2. With assistance, install muffler (Figure 2, Item 1) and clamp (Figure 2, Item 7) on pipe (Figure 2, Item 6).
3. Install three spacers (Figure 2, Item 2) and bolts (Figure 2, Item 3) to muffler (Figure 2, Item 1).
4. Tighten clamp (Figure 2, Item 7).
5. Install two clamps (Figure 2, Item 5) and hose (Figure 2, Item 4) on muffler (Figure 2, Item 1).
6. Tighten two clamps (Figure 2, Item 5) on hose (Figure 2, Item 4).
