• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
FUEL PRESSURE SENSOR REPLACEMENT
FUEL PRESSURE SENSOR REPLACEMENT - Continued

Field Maintenance Manual 2 D6K Dozer Type I With Winch and Type II With Ripper
Page Navigation
  221    222    223    224    225  226  227    228    229    230    231  
img
.
TM 5-2410-240-23-2
0059
REMOVAL
0059
WARN I N G
Diesel fuel is combustible and an irritant. Skin and eye protection is required. Ensure work
area is well ventilated.
Keep away from open flame and other ignition sources. Failure to follow this warning may
cause injury or death to personnel.
N OT E
Tag and mark wires to aid installation.
Clean up any spillage of fuel immediately.
1. Slide lock tab (Figure 1, Item 1) to unlock position and disconnect harness connector (Figure 1, Item 2) from
fuel pressure sensor (Figure 1, Item 3).
2. Remove fuel pressure sensor (Figure 1, Item 3) from engine (Figure 1, Item 4).
3. Remove washer (Figure 1, Item 5) from fuel pressure sensor (Figure 1, Item 3). Discard washer.
Figure 1. Fuel Pressure Sensor.
0059
END OF TASK
CLEANING AND INSPECTION
00059
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0282).
END OF TASK
0059-2


Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved.