TM 5-2410-240-23-2
0057
END OF TASK
CLEANING AND INSPECTION
00057
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0282).
END OF TASK
INSTALLATION
00057
N OT E
Install wires as noted during removal.
Ensure engine speed sensor is fully seated before bolt is installed.
1. Install new O-ring (Figure 2, Item 5) on engine speed sensor (Figure 2, Item 3).
2. Install engine speed sensor (Figure 2, Item 3) and bolt (Figure 2, Item 4) on engine (Figure 2, Item 6).
3. Connect harness connector (Figure 2, Item 2) to engine speed sensor (Figure 2, Item 3). Slide lock tab
(Figure 2, Item 1) to lock position.
Figure 2. Engine Speed Sensor.
0057
END OF TASK
FOLLOW-ON TASKS
00057
1. Install third fuel filter (WP 0066).
2. Verify correct operation of machine (TM 5-2410-240-10).
END OF TASK
END OF WORK PACKAGE
