TM 5-2410-240-23-2
0099
INSTALLATION CONTINUED
2. Install four guide studs (Figure 5, Item 1) on engine block (Figure 5, Item 2).
Figure 5. Guide Studs.
0099
3. Install new gasket (Figure 6, Item 2) and oil pan adapter (Figure 6, Item 3) on engine block. Support oil pan
drain adapter.
4. Install six bolts (Figure 6, Item 1) on oil pan adapter (Figure 6, Item 3). Torque bolts to 16 lb-ft (22 Nm).
5. Install plug (Figure 6, Item 22) on engine oil pan (Figure 6, Item 20).
6. Install new gasket (Figure 6, Item 21) and engine oil pan (Figure 6, Item 20) on oil pan adapter (Figure 6, Item
3). Support engine oil pan.
N OT E
Install new isolating bolts as noted during removal.
7. Install 23 new long isolating bolts (Figure 6, Item 19) and two new short isolating bolts (Figure 6, Item 12)
retaining engine oil pan (Figure 6, Item 20) on engine block. Do not torque bolts at this time.
8. Install bracket (Figure 6, Item 13) and long isolating bolt (Figure 6, Item 14) on engine oil pan (Figure 6,
Item 20). Do not torque bolt at this time.
9. Install new seal (Figure 6, Item 11) on oil level guide tube (Figure 6, Item 6).
N OT E
Position oil level guide tube as noted during removal.