• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Figure 5. Track Adjuster.
TRACK ADJUSTER AND SPRING ASSEMBLY SERVICE - Continued

Field Maintenance Manual 2 D6K Dozer Type I With Winch and Type II With Ripper
Page Navigation
  644    645    646    647    648  649  650    651    652    653    654  
img
.
TM 5-2410-240-23-2
0117
INSTALLATION CONTINUED
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure
to follow this warning may result in injury or death to personnel.
N OT E
Track adjuster weighs approximately 205 lb (93 kg).
Track carrier roller and bracket weighs approximately 120 lb (54 kg).
4. Attach lifting device on track carrier roller (Figure 6, Item 1).
5. Using lifting device, install bracket (Figure 6, Item 5) and track carrier roller (Figure 6, Item 1) on track roller
frame (Figure 6, Item 6).
6. Install two blocks (Figure 6, Item 4), six washers (Figure 6, Item 3) and bolts (Figure 6, Item 2) on track roller
frame (Figure 6, Item 6). Remove lifting device from track carrier roller (Figure 6, Item 1).
Figure 6. Track Carrier Roller.
0117
END OF TASK
0117-8


Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved.