TM 5-2410-240-23-2
0146
REMOVAL
000146
WARN I N G
Make sure master battery switch is in off position before replacing junction block. Failure
to follow this warning may result in injury or death to personnel or damage to equipment.
N OT E
Tag and mark electrical connectors to aid installation.
1. Ensure master battery switch is in OFF position.
2. Position three boots (Figure 1, Item 1) aside.
3. Remove three nuts (Figure 1, Item 3), washers (Figure 1, Item 4), cables (Figure 1, Item 2), and washers
(Figure 1, Item 6) from junction block (Figure 1, Item 5).
Figure 1. Cable Connections at Junction Block.
0146