TM 5-2410-240-23-2
0153
REMOVAL CONTINUED
10. Remove two bolts (Figure 6, Item 2), washers (Figure 6, Item 3), and clamps (Figure 6, Item 1) from machine
(Figure 6, Item 4).
11. Remove two clamps (Figure 6, Item 1) from chassis harness (Figure 6, Item 5).
Figure 6. Harness Retaining Hardware Behind and Below Batteries.
0153
N OT E
Tag and mark electrical connectors to aid installation.
12. Remove bolt (Figure 7, Item 1), washer (Figure 7, Item 2), and chassis harness ground connector (Figure 7,
Item 3) from machine (Figure 7, Item 4).
Figure 7. Chassis Harness Ground Connector Behind Hydraulic Oil Filter Base.
0153