TM 5-2410-240-23-2
0154
INSTALLATION CONTINUED
24. Install plate (Figure 22, Item 3), washers (Figure 22, Item 2), and two upper bolts (Figure 22, Item 1) on
machine (Figure 22, Item 5).
25. Tighten two lower bolts (Figure 22, Item 4).
Figure 22. Access Plate and Retaining Hardware on Rear of Machine.
0154
END OF TASK
FOLLOW-ON TASKS
000154
1. Install right rear access panel (WP 0190)
2. Install left rear access panel (WP 0193)
3. Install fuel tank guard (WP 0195).
4. Install debris guards (WP 0187).
5. Install rear and center bottom guards (WP 0156).
6. Install front cab floor plates (WP 0205).
7. Install winch assembly (WP 0265).
9. Verify correct operation of machine (TM 5-2410-240-10).
END OF TASK
END OF WORK PACKAGE