TM 5-2410-240-23-3
0200
REMOVAL CONTINUED
N OT E
Note location of washers to aid installation.
Note position of strips to aid installation.
14. Remove washer (Figure 8, Item 2) from circuit breakers (Figure 8, Item 1).
15. Remove three nuts (Figure 8, Item 4), washer (Figure 8, Item 5), and strips (Figure 8, Item 3) from circuit
breakers (Figure 8, Item 1).
Figure 8. Strip Connection to Circuit Breaker.
0200
END OF TASK
CLEANING AND INSPECTION
000200
Clean and inspect all mechanical components IAW Mechanical General Maintenance Instructions (WP 0282).
END OF TASK
INSTALLATION
000200
N OT E
Install washers as noted during removal.
Install strips as noted during removal.
1. Install three strips (Figure 8, Item 3), washers (Figure 8, Item 5), and nuts (Figure 8, Item 4) on circuit breakers
(Figure 8, Item 1).
2. Install washer (Figure 8, Item 2) on circuit breakers (Figure 8, Item 1).