• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
CAB REPLACEMENT - Continued
Figure 12. Left Front Cab Mount.

Field Maintenance Manual 3 D6K Dozer Type I With Winch and Type II With Ripper
Page Navigation
  571    572    573    574    575  576  577    578    579    580    581  
img
.
TM 5-2410-240-23-3
0232
INSTALLATION CONTINUED
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure
to follow this warning may result in injury or death to personnel.
N OT E
The cab weighs approximately 5,000 lb (2,268 kg).
The following procedure is for the left side rear cab mount. Use this same procedure for
the right side rear cab mount.
18. Install lifting device on cab.
19. With assistance and using suitable lifting device, install cab on machine.
20. Install bolt (Figure 11, Item 1), washer (Figure 11, Item 2), spacer (Figure 11, Item 3), and rubber mount
(Figure 11, Item 4) on cab.
Figure 11. Left Rear Cab Mount.
0232
0232-11


Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved.