TM 5-2410-241-10
0012
Table 1. Preventive Maintenance Checks and Services (PMCS) - Continued.
0012
LOCATION
ITEM TO
CHECK/
NOT FULLY MISSION
ITEM
MAN-
SERVICE
PROCEDURE
CAPABLE IF:
NO.
INTERVAL HOURS
51 After
WARN I N G
(Cont.)
Compressed air used for cleaning or drying purposes, or
for clearing restrictions, should never exceed 30 psi (207
kPa). Wear protective clothing (goggles/shield, gloves,
etc.) and use caution to avoid injury to personnel.
a. Loosen two knobs and remove Cab fresh air filter missing or
Cab Fresh Air
damaged if necessary for
Filter
filter cover.
mission.
b. Remove restrictor plate.
c. Remove filter.
d. Using a shop light, inspect filter.
e. Clean filter using a maximum of
30 psi (205 kPa) compressed air.
f. Inspect filter for tears or other
damage.
g. Replace filter if damaged.
h. Install filter.
i. Install restrictor plate.
j. Install cover and tighten knobs.
Figure 17. Cab Fresh Air Filter.
0012
