TM 5-2410-241-10
0012
Table 1. Preventive Maintenance Checks and Services (PMCS) - Continued.
0012
LOCATION
ITEM TO
CHECK/
NOT FULLY MISSION
ITEM
MAN-
SERVICE
PROCEDURE
CAPABLE IF:
NO.
INTERVAL HOURS
Tow Pin (Type I Check tow pin (Figure 23, Item 1), Damaged or missing compo-
59
After
dozers only)
two cotter pins (Figure 23, Item 2), nents if required for mission.
and winch frame (Figure 23, Item 3)
at tow pin holes for damage or miss-
ing components.
Figure 23. Tow Pin.
0012
RIGHT SIDE
60
After
Overall View
Check right side of machine for evi- Class III oil leak, any fuel or
dence of leakage or damage.
coolant leak, or damage that
would impair operation is
evident.
61
After
0.2
Hydraulic Tank
WARN I N G
Sight Gauge
At operating temperature, hydraulic tank is hot and under
pressure. Do not remove hydraulic tank filler cap when
engine is running. Remove the filler cap only after it is cool
enough to touch with bare hands.
Remove filler cap slowlyto relieve pressure.
Failure to follow these warnin s may result in injury or
g
death to personnel.