• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Figure 25. Transmission Oil Level Gauge, Filler Tube, and Cap.
Figure 26. Pivot Shaft Oil Level Check.

Operators Manual D7R Dozer Type I With Winch and Type II With Ripper
Page Navigation
  148    149    150    151    152  153  154    155    156    157    158  
img
.
TM 5-2410-241-10
0012
Table 1. Preventive Maintenance Checks and Services (PMCS) - Continued.
0012
LOCATION
ITEM TO
CHECK/
NOT FULLY MISSION
ITEM
MAN-
SERVICE
PROCEDURE
CAPABLE IF:
NO.
INTERVAL HOURS
Right Lift Cylin- a. Check right lift cylinder for
Class III leak, damaged,
63
After
der
debris, leakage, or damage.
missing, or excessively worn
components that would
b. Check right lift cylinder mounting
impair operation are evident.
for damage or missing components.
c. Check right lift cylinder lines and
fittings for leakage or damage.
64
After
Refueling
WARN I N G
DO NOT smoke or permit any open flame in area of
machine while you are servicing fuel system. Be sure hose
nozzle is grounded against filler tube during refueling to
prevent static electricity. Failure to follow this warning may
cause injury to personnel or damage to equipment.
Operating personnel must wearfuel-resistant gloves when
handling fuels. If exposed to fuel, promptly wash exposed
skin and change fuel-soaked clothing.
N OT E
Place portable fire extinguisher within reach prior to
refueling.
DO NOT overfill fuel tank. Iffuel starts foaming from fuel
tank, stop IMMEDIATELY to avoid fuel spillage.
a. Check fuel tank, filler tube,
Any fuel leak is evident or
strainer, and filler cap for damage or damage is noted.
leaks.
b. Inspect filler cap gasket for
Filler cap or gasket is
damage.
missing or damaged.
c. Add fuel (WP 0022, Items 6, 7,
or 8) to tank. DO NOT overfill.
d. Reinstall filler cap and secure.
0012-40


Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved.