TM 5-2410-241-23-1
0019
Table 2. Engine Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
91-2 Incorrect Throttle
18. Using digital multimeter
1. If continuity is found, replace
Switch Inputs -
(WP 0296), test for continuity
throttle switch (WP 0208). Ensure
Continued
between pin 1 and pin 5 on the
all harness connectors are recon-
throttle switch (WP 0018,
nected. Verify correct operation of
Figure 16).
machine (TM 5-2410-241-10).
2. If continuity is not found, proceed
to step 19.
19. Hold throttle switch in HIGH (rab-
bit) position (TM 5-2410-241-10).
20. Using digital multimeter
1. If continuity is found, replace
(WP 0296), test for continuity
throttle switch (WP 0208). Ensure
between pin 4 and pin 5 on throt-
all harness connectors are recon-
tle switch (WP 0018, Figure 16).
nected. Verify correct operation of
machine (TM 5-2410-241-10).
2. If continuity is not found, proceed
to step 21
21. Allow throttle switch to return to
neutral position (TM 5-2410-241-
10).
22. Using digital multimeter
1. If continuity is found, replace
(WP 0296), test for continuity
throttle switch (WP 0208). Ensure
between pin 1 and pin 5 on the
all harness connectors are recon-
throttle switch (WP 0018,
nected. Verify correct operation of
Figure 16).
machine (TM 5-2410-241-10).
2. If continuity is not found, proceed
to step 23.
23. With throttle switch in neutral
position (TM 5-2410-241-10).
24. Using digital multimeter
1. If continuity is found, replace
(WP 0296), test for continuity
throttle switch (WP 0208). Ensure
between pin 6 and pin 2 on the
all harness connectors are recon-
throttle switch (WP 0018,
nected. Verify correct operation of
Figure 16).
machine (TM 5-2410-241-10).
2. If continuity is not found, proceed
to step 25.
25. With throttle switch in neutral
position (TM 5-2410-241-10).
26. Using digital multimeter
1. If continuity is found, proceed to
(WP 0296), test for continuity
step 27.
between pin 4 and pin 5 on the
2. If continuity is not found, replace
throttle switch (WP 0018,
throttle switch (WP 0208). Ensure
Figure 16).
all harness connectors are recon-
nected. Verify correct operation of
machine (TM 5-2410-241-10).
27. With throttle switch in neutral
position (TM 5-2410-241-10).
0019-34