TM 5-2410-241-23-1
0019
Table 2. Engine Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
91-2 Incorrect Throttle
9. Hold the throttle switch in the
Switch Inputs -
LOW (tortoise) position
Continued
(TM 5-2410-241-10).
10. Using digital multimeter
1. If continuity is found, replace
(WP 0296), test for continuity
throttle switch (WP 0208). Ensure
between pin 3 and pin 2 on throt-
all harness connectors are recon-
tle switch (WP 0018, Figure 16).
nected. Verify correct operation of
machine (TM 5-2410-241-10).
2. If continuity is not found, proceed
to step 11.
11. Hold throttle switch in the LOW
(tortoise) position.
12. Using digital multimeter
1. If continuity is found, replace
(WP 0296), test for continuity
throttle switch (WP 0208). Ensure
between pin 6 and pin 2 on throt-
all harness connectors are recon-
tle switch (WP 0018, Figure 16).
nected. Verify correct operation of
machine (TM 5-2410-241-10).
2. If continuity is not found, proceed
to step 13.
13. Hold throttle switch in HIGH (rab-
bit) position (TM 5-2410-241-10).
14. Using digital multimeter
1. If continuity is not found, proceed
(WP 0296), test for continuity
to step 15.
between pin 6 and pin 2 on the
2. If continuity is found, replace
throttle switch (WP 0018,
throttle switch (WP 0208). Ensure
Figure 16).
all harness connectors are recon-
nected. Verify correct operation of
machine (TM 5-2410-241-10).
15. Hold throttle switch in HIGH (rab-
bit) position (TM 5-2410-241-10).
16. Using a digital multimeter
1. If continuity is found, proceed to
(WP 0296), test for continuity
step 17.
between pin 3 and pin 2 on the
2. If continuity is not found, replace
throttle switch (WP 0018,
throttle switch (WP 0208). Ensure
Figure 16).
all harness connectors are recon-
nected. Verify correct operation of
machine (TM 5-2410-241-10).
17. Hold throttle switch in the HIGH
(rabbit) position (TM 5-2410-241-
10).
0019-33