TM 5-2410-241-23-1
0021
Table 2. Chassis Troubleshooting Procedures - Continued.
0021
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
490-4 Hydraulic Lockout
10. Using digital multimeter (WP
1. If continuity is found, replace
Solenoid Voltage Below
0296), test for continuity between
hydraulic lockout switch
Normal - Continued
pin 5 and 6 on hydraulic lockout
(WP 0208). Ensure all harness
switch (WP 0018, Figure 91).
connectors are reconnected. Ver-
ify correct operation of machine
(TM 5-2410-241-10).
2. If continuity is NOT found, pro-
ceed to step 11.
11. Ensure hydraulic lockout switch is
in the UNLOCKED (Figure 3,
Item 1) position.
12. Using digital multimeter (WP
1. If continuity is NOT found, replace
0296), test for continuity between
hydraulic lockout switch
pin 4 and 5 on hydraulic lockout
(WP 0208). Ensure all harness
switch (WP 0018, Figure 91).
connectors are reconnected. Ver-
ify correct operation of machine
(TM 5-2410-241-10).
2. If continuity is found, proceed to
step 13.
13. Remove left platform access
panel (WP 0212).
Figure 3. Hydraulic Lockout Switch.
0021