TM 5-2410-241-23-1
0022
Table 1. Cab Troubleshooting Procedures - Continued.
0022
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
No Power with Ignition
20. Using digital multimeter (WP
1. If continuity is NOT found, pro-
Switch ON - Continued
0296), test for continuity between
ceed to step 21.
pin 19 on platform harness con-
2. If continuity is found, replace plat-
nector MA-C3 (WP 0018,
form harness (WP 0209) and
Figure21) and all other pins in
instrument panel harness (WP
platform harness connector MA-
0260). Ensure all harness con-
C3 (WP 0018 Figure 21).
nectors are reconnected. Verify
correct operation of machine (TM
5-2410-241-10).
21. Using digital multimeter (WP
1. If continuity is found, proceed to
0296), test for continuity between
step 22.
pin 19 on fuse panel wiring har-
2. If continuity is NOT found, replace
ness connector A-C1 (WP 0018,
fuse panel wiring harness (WP
Figure 22) and right cavity of fuse
0176). Ensure all harness con-
#14 (Figure 23, item 2).
nectors are reconnected. Verify
correct operation of machine (TM
5-2410-241-10).
22. Using digital multimeter
1.
If continuity is NOT found, replace
(WP 0296), test for continuity
ignition switch (WP 0262). Ensure
between pin 19 on fuse panel wir-
all harness connectors are recon-
ing harness connector A-C1
nected. Verify correct operation of
(WP 0018, Figure 22) and ground.
machine (TM 5-2410-241-10).
2.
If continuity is found, replace fuse
panel wiring harness (WP 0176).
Ensure all harness connectors
are reconnected. Verify correct
operation of machine (TM 5-2410-
241-10).
23. Drop instrument panel and dis-
connect instrument panel harness
ignition switch connector E-C6
(WP 0018, Figure 163) from igni-
tion switch.
24. Disconnect engine harness con-
nector V-C1 (WP 0018, Figure 12)
from platform harness connector
MA-C22 (WP 0018, Figure 11).
25. Disconnect platform harness con-
nector MA-C3 (WP 0018, Figure
21) from fuse panel wiring har-
ness connector A-C1 (WP 0018,
Figure 22).
0022-135
