TM 5-2410-241-23-1
0022
Table 1. Cab Troubleshooting Procedures - Continued.
0022
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
No Power with Ignition
4. Remove Fuse #14 (Figure 14,
Switch ON - Continued
Item 1) from fuse panel (TM 5-
2410-241-10).
Figure 14. Fuse #14.
0022
5. Using digital multimeter (WP
1. If continuity is found, install Fuse
0296), test for continuity between
#14 on fuse panel (TM 5-2410-
blades of Fuse #14.
241-10). Proceed to step 14.
2. If continuity is NOT found, replace
Fuse #14 (TM 5-2410-241-10).
Proceed to step 6.
6. Turn battery disconnect switch to
ON position (TM 5-2410-241-10).
7. Turn battery disconnect switch to
OFF position (TM 5-2410-241-
10).