TM 5-2410-241-23-1
0039
Table 1. Preventive Maintenance Checks and Services (PMCS) - Continued.
LOCATION
ITEM TO
CHECK/
ITEM
NOT FULLY MISSION
SERVICE
NO.
INTERVAL
PROCEDURE
CAPABLE IF:
8
Every 500
e. Remove breather element from
Engine
(Cont.) Hours or 3
crankcase breather assembly and
Crankcase
months
wash in nonflammable solvent. Dry
Breather -
breather element with compressed air.
Clean
f. Install breather element in
crankcase breather assembly.
g. Install new gasket (Figure 5, Item
9), crankcase breather assembly
(Figure 5, Item 3), four washers
(Figure 5, Item 7), and bolts (Figure 5,
Item 6) on valve cover base (Figure 5,
Item 10).
h. Position harness (Figure 5, Item 8)
and clamp (Figure 5, Item 5). Install
bolt (Figure 5, Item 4).
i. Install hose (Figure 5, Item 1) and
clamp (Figure 5, Item 2) on crankcase
breather assembly (Figure 5, Item 3).
0039-10