TM 5-2410-241-23-1
0039
Table 1. Preventive Maintenance Checks and Services (PMCS) - Continued.
LOCATION
ITEM TO
CHECK/
ITEM
NOT FULLY MISSION
SERVICE
NO.
INTERVAL
PROCEDURE
CAPABLE IF:
6
250 Hours
a. Inspect drive belts. Replace belt if
Belt has excessive cracking,
Drive Belt
or Monthly
excessively cracked, worn, or
wear, or damage.
damaged, refer to WP 0096, or WP
0098.
b. Inspect for loose or damaged
Pulley is loose or damaged.
pulley, refer to WP 0095.
Figure 4. Drive Belts.
0039
Refer to Winch Oil Service (WP 0274).
7
Initial 500
Winch Oil and
Hours
Breather -
Change/Clean
8
Every 500
a. Remove clamp (Figure 5, Item 2)
Breather missing or damaged.
Engine
Hours or 3
and hose (Figure 5, Item 1) from
Crankcase
months
crankcase breather assembly (Figure
Breather -
5, Item 3).
Clean
b. Remove bolt (Figure 5, Item 4),
clamp (Figure 5, Item 5) and position
harness (Figure 5, Item 8) aside.
c. Remove four bolts (Figure 5,
Item 6), washers (Figure 5, Item 7),
and crankcase breather assembly
(Figure 5, Item 3) from valve cover
base (Figure 5, Item 10).
d. Remove gasket (Figure 5, Item 9)
from crankcase breather assembly
(Figure 5, Item 3). Discard gasket.