TM 5-2410-241-23-1
0048
CLEANING AND INSPECTION
00048
1. Clean all parts IAW Mechanical General Maintenance Instructions WP 0295.
2. Inspect bolt holes (Figure 2, Item 1) on trunnion bracket (Figure 2, Item 2) for elongation, cracks, or damage.
Replace trunnion, if damaged.
3. Inspect vibration dampers (Figure 2, Item 5) on trunnion bracket (Figure 2, Item 2) for deterioration, flaking,
splits, or missing pieces. Replace trunnion, if damaged.
4. Inspect bolt holes (Figure 2, Item 4) on trunnion (Figure 2, Item 3) for elongation, cracks, or damage. Replace
trunnion, if damaged.
5. Inspect trunnion (Figure 2, Item 3) for deformation, cracks, dents, or damage. Replace trunnion, if damaged.
Figure 2. Trunnion Inspection.
0048
INSTALLATION
00048
1. Install trunnion (Figure 3, Item 2), eight washers (Figure 3, Item 4), and bolts (Figure 3, Item 3) on engine
(Figure 3, Item 1).
Figure 3. Trunnion.
0048
END OF TASK