TM 5-2410-241-23-2
0058
REMOVAL
00058
1. Remove bolt (Figure 1, Item 12), washer (Figure 1, Item 11), and clamp (Figure 1, Item 13) from rear engine
lifting bracket (Figure 1, Item 8).
N OT E
Note position and location of tiedown straps to aid installation.
2. Remove tiedown straps (Figure 1, Item 14) from harness (Figure 1, Item 15). Discard tiedown straps and
position harness aside.
3. Remove bolt (Figure 1, Item 1), washer (Figure 1, Item 2), clamp (Figure 1, Item 3), spacer (Figure 1, Item 18)
and clamp (Figure 1, Item 17) from plate (Figure 1, Item 7).
4. Remove clamp (Figure 1, Item 3) from hose (Figure 1, Item 4).
5. Remove clamp (Figure 1, Item 17) from hose (Figure 1, Item 16).
6. Position hose (Figure 1, Item 16) and hose (Figure 1, Item 4) aside.
7. Remove two nuts (Figure 1, Item 9), washers (Figure 1, Item 10), bolts (Figure 1, Item 5), washers (Figure 1,
Item 6) and plate (Figure 1, Item 7) from rear engine lifting bracket (Figure 1, Item 8).
Figure 1. Rear Engine Lifting Bracket Attachments.
0058