TM 5-2410-241-23-2
0058
INSTALLATION CONTINUED
3. Install plate (Figure 3, Item 7), two washers (Figure 3, Item 6), bolts (Figure 3, Item 5), washers (Figure 3,
Item 10), and nuts (Figure 3, Item 9) on rear engine lifting bracket (Figure 3, Item 8).
4. Position hose (Figure 3, Item 16) and hose (Figure 3, Item 4) on machine.
5. Install clamp (Figure 3, Item 17) on hose (Figure 3, Item 16).
6. Install clamp (Figure 3, Item 3) on hose (Figure 3, Item 4).
7. Install clamp (Figure 3, Item 17), spacer (Figure 3, Item 18), clamp (Figure 3, Item 3), washer (Figure 3,
Item 2), and bolt (Figure 3, Item 1) on plate (Figure 3, Item 7).
N OT E
Install tiedown straps as noted during removal.
8. Install new tiedown straps (Figure 3, Item 14) on harness (Figure 3, Item 15).
9. Install clamp (Figure 3, Item 13), washer (Figure 3, Item 11), and bolt (Figure 3, Item 12) on rear engine lifting
bracket (Figure 3, Item 8).
Figure 3. Rear Engine Lifting Bracket Attachments.
0058
END OF TASK
FOLLOW-ON TASKS
00058
1. Install engine enclosure right door guard (WP 0204).
2. Install engine enclosure left door guard (WP 0202).
3. Verify correct operation of machine (TM 5-2410-241-10).
END OF TASK
END OF WORK PACKAGE
