TM 5-2410-241-23-2
0074
REMOVAL CONTINUED
5. Remove gasket (Figure 2, Item 4) from coolant manifold (Figure 2, Item 5). Discard gasket.
N OT E
Note orientation of temperature regulators and lip seals to aid installation.
6. Remove two temperature regulators (Figure 2, Item 2) and lip seals (Figure 2, Item 3) from housing (Figure 2,
Item 1). Discard lip seals.
7. Remove cap (Figure 2, Item 14) from fitting (Figure 2, Item 13).
8. Remove fitting (Figure 2, Item 13), O-ring (Figure 2, Item 12), fitting (Figure 2, Item 11) and O-ring (Figure 2,
Item 10) from housing (Figure 2, Item 1). Discard O-rings.
9. Remove plug (Figure 2, Item 9) and O-ring (Figure 2, Item 8) from housing (Figure 2, Item 1). Discard O-ring.
10. Remove plug (Figure 2, Item 7) and O-ring (Figure 2, Item 6) from housing (Figure 2, Item 1). Discard O-ring.
Figure 2. Temperature Regulator.
0074
END OF TASK
CLEANING AND INSPECTION
00074
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0295).
END OF TASK
