TM 5-2410-241-23-2
0077
REMOVAL
00077
N OT E
Tag hoses to aid installation.
1. Loosen two clamps (Figure 1, Item 2) from hose (Figure 1, Item 3).
2. Remove two bolts (Figure 1, Item 4), and washers (Figure 1, Item 5) from water pump elbow (Figure 1, Item 7)
from water pump (Figure 1, Item 9).
3. Remove three bolts (Figure 1, Item 10), and washers (Figure 1, Item 11) from oil cooler housing cap (Figure 1,
Item 1).
4. Remove hose (Figure 1, Item 3), water pump elbow (Figure 1, Item 7) and oil cooler housing cap (Figure 1,
Item 1) from machine.
5. Remove O-ring (Figure 1, Item 6) from oil cooler housing cap (Figure 1, Item 1). Discard O-ring.
6. Remove gasket (Figure 1, Item 8) from water pump elbow (Figure 1, Item 7). Discard gasket.
7. Remove hose (Figure 1, Item 3) from water pump elbow (Figure 1, Item 7) and oil cooler housing cap
(Figure 1, Item 1).
8. Remove two clamps (Figure 1, Item 2) from hose (Figure 1, Item 3).
Figure 1. Oil Cooler Connection.
0077
