TM 5-2410-241-23-2
0078
REMOVAL
00078
N OT E
Tag hoses to aid installation.
1. Loosen two clamps (Figure 1, Item 3) from hose (Figure 1, Item 2).
2. Remove hose (Figure 1, Item 2) from water pump (Figure 1, Item 1).
3. Loosen clamp (Figure 1, Item 8) from hose (Figure 1, Item 9).
4. Remove hose (Figure 1, Item 9) from water pump (Figure 1, Item 1).
5. Remove fuel drain hose (Figure 1, Item 10) from clamp (Figure 1, Item 7). Place fuel drain hose aside.
N OT E
Note position and location of bolts and clamp to aid installation.
6. Remove three bolts (Figure 1, Item 6), washers (Figure 1, Item 5), clamp (Figure 1, Item 7), water pump
(Figure 1, Item 1) and gasket (Figure 1, Item 4) from machine. Discard gasket.
Figure 1. Aftercooler Pump.
0078
END OF TASK
CLEANING AND INSPECTION
00078
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0295).
END OF TASK