TM 5-2410-241-23-2
0078
INSTALLATION
00078
1. Install new gasket (Figure 1, Item 4), water pump (Figure 1, Item 1), clamp (Figure 1, Item 7), three washers
(Figure 1, Item 5) and bolts (Figure 1, Item 6) on machine.
N OT E
Install hoses as tagged during removal.
2. Install fuel drain hose (Figure 1, Item 10) on clamp (Figure 1, Item 7).
3. Install hose (Figure 1, Item 9) on water pump (Figure 1, Item 1).
4. Tighten clamps (Figure 1, Item 8) on hose (Figure 1, Item 9).
5. Install hose (Figure 1, Item 2) on water pump (Figure 1, Item 1).
6. Tighten two clamps (Figure 1, Item 3) on hose (Figure 1, Item 2).
END OF TASK
FOLLOW-ON TASKS
00078
1. Fill cooling system (WP 0113).
2. Install engine enclosure left door guard (WP 0202).
3. Verify correct operation of machine (TM 5-2410-241-10).
END OF TASK
END OF WORK PACKAGE
0078-3/(4 blank)