TM 5-2410-241-23-2
0099
INSTALLATION
00099
1. Install pulley (Figure 7, Item 1), washer (Figure 7, Item 4), and nut (Figure 7, Item 3) on alternator (Figure 7,
Item 2). Tighten nut to 94 7 lb-ft (127 10 Nm).
Figure 7. Pulley.
099
2. Install rear guards (Figure 8, Item 5), rear cover, (Figure 8, Item 4), one bracket (Figure 8, Item 3), three
washers (Figure 8, Item 2), and bolts (Figure 8, Item 1) on alternator (Figure 8, Item 6).
Figure 8. Alternator, Bracket, and Retaining Hardware.
099