TM 5-2410-241-23-2
0103
REMOVAL CONTINUED
7. Using lifting device and assistance, remove flywheel housing (Figure 3, Item 6) from engine (Figure 3, Item 7).
Lower flywheel housing onto flat surface.
8. Remove lifting device from flywheel housing (Figure 3, Item 6).
9. Remove two guide studs (Figure 3, Item 10) from engine (Figure 3, Item 7).
10. Remove plug (Figure 3, Item 2) and gasket (Figure 3, Item 3) from flywheel housing (Figure 3, Item 6). Discard
gasket.
11. Remove six plugs (Figure 3, Item 4) and O-rings (Figure 3, Item 5) from flywheel housing (Figure 3, Item 6).
Discard O-rings.
Figure 3. Flywheel Housing and Retaining Hardware.
0103
END OF TASK
CLEANING AND INSPECTION
000103
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0295).
END OF TASK