• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Figure 12. Final Drive Bolts.
Figure 14. Cap and Sprocket Bolts.

Field Maintenance Manual D7R Dozer Type I With Winch and Type II With Ripper
Page Navigation
  680    681    682    683    684  685  686    687    688    689    690  
img
.
TM 5-2410-241-23-2
0138
INSTALLATION CONTINUED
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure
to follow this warning may cause injury or death to personnel.
N OT E
Final drive weighs approximately 1,875 lb (850 kg).
12. With assistance and using lifting device, remove two nuts (Figure 13, Item 6), washers (Figure 13, Item 5),
bolts (Figure 13, Item 4), washers (Figure 13, Item 3), and lifting bracket (Figure 13, Item 2) from final drive
assembly (Figure 13, Item 7).
13. Remove lifting device and shackle (Figure 13, Item 1) from lifting bracket (Figure 13, Item 2).
Figure 13. Lifting Bracket.
0138
0138-13


Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved.