TM 5-2410-241-23-2
0141
REMOVAL CONTINUED
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure to
follow this warning may cause injury or death to personnel.
N OT E
Gear pump weighs approximately 90 lb (41 kg).
14. Attach sling and chain hoist to pump (Figure 7, Item 1).
15. Remove slack from sling.
16. Remove two nuts (Figure 7, Item 4) and washers (Figure 7, Item 5) from pump (Figure 7, Item 1).
17. Using chain hoist, remove two bolts (Figure 7, Item 2), washers (Figure 7, Item 3), and pump (Figure 7, Item 1)
from machine. Place pump on flat level surface.
18. Remove chain hoist and sling from pump (Figure 7, Item 1).
Figure 7. Pump.
0141
