TM 5-2410-241-23-2
0141
INSTALLATION CONTINUED
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure
to follow this warning may cause injury or death to personnel.
N OT E
Gear pump weighs approximately 90 lb (41 kg).
2. Attach sling and chain hoist to pump (Figure 10, Item 1).
3. Using chain hoist, install pump (Figure 10, Item 1), two washers (Figure 10, Item 3), and bolts (Figure 10,
Item 2) on machine.
4. Install two washers (Figure 10, Item 5) and nuts (Figure 10, Item 4) on pump (Figure 10, Item 1).
5. Remove sling and chain hoist from pump (Figure 10, Item 1).
Figure 10. Pump.
0141
