TM 5-2410-241-23-2
0181
CLEANING AND INSPECTION
000181
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0295).
END OF TASK
INSTALLATION
000181
1. Install new O-ring (Figure 3, Item 3) on sensor (Figure 3, Item 2).
2. Install sensor (Figure 3, Item 2) on hydraulic tank (Figure 3, Item 1).
N OT E
Install electrical connectors and route harnesses as noted during removal.
3. Connect connector (Figure 2, Item 1) to connector (Figure 2, Item 3).
4. Install new tiedown strap (Figure 2, Item 2) on connector (Figure 2, Item 1).
5. Close door (Figure 4, Item 4) on machine.
6. Install plate (Figure 4, Item 1), two washers (Figure 4, Item 3), and bolts (Figure 4, Item 2) on machine.
Figure 4. Door.
0181
END OF TASK
FOLLOW-ON TASKS
000181
1. Install transmission filter (WP 0152).
2. Fill hydraulic tank (WP 0184).
3. Verify correct operation of machine (TM 5-2410-241-10).
END OF TASK
END OF WORK PACKAGE
